Now showing . Phone number, services and service areas are updated to your local crew. Phone, services & service area updated
Find your local crew
Pick a branch and we’ll show the right phone number, services and service area across the whole site. You can change it anytime from the top bar.
Phone, services and service area update to match.
Serving Pleasant Hill
Dripping relief valve, leaky faucet or low shower pressure? We find the cause first. Plumbing repairs in Pleasant Hill with 24/7 emergency service.
By Jarod Smith, Owner, Clog Busters. 26 years in plumbing and drain cleaning. Updated October 2026.
A faucet that keeps dripping or a water heater valve that weeps onto the floor usually has a cause you cannot see. Our plumbing repairs in Pleasant Hill start by finding that cause, then fixing the part that failed and the problem behind it.
We at Clog Busters Drain Cleaning & Repair work in homes across Pleasant Hill, from the Copper Creek Lake area to the streets along Four Mile Creek. Book service online and we will walk you through your options before any work begins.
Most repair calls fall into a handful of patterns. These are the ones we see most in the area.
Water grows in volume as it heats. In an open system, that extra water can push back toward the public main. When a check valve, pressure reducing valve or backflow preventer sits on your water service, the extra water has nowhere to go.
The 2024 Uniform Plumbing Code, which Iowa adopted in 2025, treats this as a closed system and requires an approved way to control thermal expansion, such as an expansion tank.
Here is what a closed system does inside your home:
The standard fix is a working expansion tank. The guide describes it as a small tank with a sealed, compressible air cushion that stores the expanded water. When that air charge is gone, the system behaves as if no tank were installed.
That is why we treat a dripping relief valve as a symptom. Before we replace fixture parts in a Pleasant Hill home, we check whether the water service is closed, whether an expansion tank is present and whether it still holds its charge. Solving the pressure problem first keeps new parts from failing early.
Janelle Manor’s water heater was not working the way it should. Dylan and Anthony came out to look over the whole unit and get it running again.
Janelle Manor wrote: “Dylan and Anthony did an awesome job they did a thorough check of my water heater and got it working beautifully thank you again Dylan and Anthony if I hear of friends or family that are needing work done in their home I will definitely recommend you gentleman and your company.”
The water heater is where thermal expansion problems usually show up first, so a careful look at the tank and the valves around it is time well spent. Read this review on Google
A customer named Austin had weak cold water pressure in an apartment bathroom shower. The cause went well past a single worn part.
Austin wrote: “Noah and Lukus came to my apartment to fix my cold water pressure in my bathroom shower. Turns out that most of the actual pipes and faucets needed replaced and they knocked it all out without any issues!”
Low pressure at one fixture is often a sign of a larger problem behind the wall. We find the real cause, explain the choices and fix it with parts carried on our trucks whenever we can. Read this review on Google
Our owner, Jarod Smith, holds Iowa Master Plumber license #4913, issued by the Iowa Department of Inspections, Appeals, and Licensing.
Tell us what is leaking, dripping or not working, and we will set a time that fits your day. Schedule your repair online.
For everything else we handle in town, from drains to water heaters, visit our Pleasant Hill plumbing and drain services page.
The most common cause is thermal expansion in a closed system. If your Pleasant Hill home has a check valve, PRV or backflow preventer on the water service, heated water cannot push back to the main, so pressure builds until the relief valve opens. A failed or missing expansion tank is the usual culprit.
No. The relief valve is a safety device, and a valve that opens every day wears out. We replace a worn valve and fix the pressure problem behind it, so the new valve is not doing the same job again within months.
We offer same day service, and our crews work out of our Des Moines branch, a short drive from Pleasant Hill. When water is actively spreading, use our 24/7 emergency service instead of waiting for a regular appointment.
If the body is sound and parts are available, a new cartridge or washer usually solves the leak. If the finish is failing, parts are hard to find or the faucet has leaked at more than one point, replacement often costs less over time. We give you both options with prices.
Repeated leaks at different fixtures, low pressure in several rooms or rusty water point to something system wide. A plumbing inspection in Pleasant Hill reviews supply lines, valves and the water heater together, so you can plan repairs instead of reacting to them.
Book service online and describe what you are seeing. We will confirm a time, and our plumber will explain the options before starting any work.